Bottle labelling guide
Round bottle label placement guide.
Plan label length, start position and wraparound coverage before selecting a round bottle labeller.
Work out whether the label is wraparound or panel style.
A wraparound label follows the curve of the bottle. A panel label may sit on the front only, or as separate front and back labels. The machine route and label timing depend on this decision.
For full wrap labels, label length and bottle diameter need to be checked so the label does not overlap unexpectedly or finish in the wrong position.
Consider start and end position.
The start position can matter when artwork has a barcode, ingredients panel or front-facing brand panel. Round bottles without orientation features are normally easier to label than bottles that need a precise start position relative to a mould mark or closure.
If the label wraps close to a shoulder, taper or rib, testing is recommended.
Check label sensing and wipe-down.
Label placement accuracy depends on label sensing, product rotation and wipe-down pressure. Clear labels or unusual backing paper may require different sensors and testing before production.
Checklist before you enquire
- Bottle diameter and circumference
- Label length and height
- Label start position requirement
- Full wrap, partial wrap or front/back spacing
- Bottle taper, ribs, seams or shoulders
- Label material and backing paper
- Target tolerance and output speed
- Filled and empty sample behaviour
FAQ
Common questions.
Can round bottles have separate front and back labels?
Yes, but label spacing and application timing must be checked.
Can a label wrap fully around the bottle?
Often yes, if label length and bottle diameter are suitable.
Why do labels drift on round bottles?
Drift can come from rotation, taper, label feed, backing paper or wipe-down issues.
Can clear labels be placed accurately?
They can often be applied with suitable sensing and testing.
Next steps